### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # ### update-modules: start processing /etc/modutils/0keep # DO NOT MODIFY THIS FILE! # This file is not marked as conffile to make sure if you upgrade modutils # it will be restored in case some modifications have been made. # # The keep command is necessary to prevent insmod and friends from ignoring # the builtin defaults of a path-statement is encountered. Until all other # packages use the new `add path'-statement this keep-statement is essential # to keep your system working keep ### update-modules: end processing /etc/modutils/0keep ### update-modules: start processing /etc/modutils/1devfsd # /etc/modules.devfs # Richard Gooch 24-MAR-2002 # # This file comes with devfsd-vDEVFSD-VERSION which is available from: # http://www.atnf.csiro.au/~rgooch/linux/ # or directly from: # ftp://ftp.atnf.csiro.au/pub/people/rgooch/linux/daemons/devfsd-vDEVFSD-VERSION.tar.gz ############################################################################### # Sample configurations that you may want to place in /etc/modules.conf # #alias sound-slot-0 sb #alias /dev/v4l bttv #alias /dev/misc/watchdog pcwd #alias gen-md raid0 #alias /dev/joysticks joystick #probeall scsi_hostadapter sym53c8xx ############################################################################### # Generic section: do not change or copy # # All HDDs probeall /dev/discs scsi_hostadapter sd_mod ide-probe-mod ide-disk ide-floppy DAC960 alias /dev/discs/* /dev/discs # All CD-ROMs probeall /dev/cdroms scsi_hostadapter sr_mod ide-probe-mod ide-cd cdrom alias /dev/cdroms/* /dev/cdroms alias /dev/cdrom /dev/cdroms # All tapes probeall /dev/tapes scsi_hostadapter st ide-probe-mod ide-tape alias /dev/tapes/* /dev/tapes # All SCSI devices probeall /dev/scsi scsi_hostadapter sd_mod sr_mod st sg # All IDE devices alias /dev/hd* /dev/ide alias /dev/ide/host*/bus*/target*/lun*/* /dev/ide probeall /dev/ide ide-probe-mod ide-disk ide-cd ide-tape ide-floppy # IDE CD-ROMs alias /dev/ide/*/cd ide-cd # SCSI HDDs probeall /dev/sd scsi_hostadapter sd_mod alias /dev/sd* /dev/sd # SCSI CD-ROMs probeall /dev/sr scsi_hostadapter sr_mod alias /dev/sr* /dev/sr alias /dev/scsi/*/cd sr_mod # SCSI tapes probeall /dev/st scsi_hostadapter st alias /dev/st* /dev/st alias /dev/nst* /dev/st # SCSI generic probeall /dev/sg scsi_hostadapter sg alias /dev/sg* /dev/sg alias /dev/scsi/*/generic /dev/sg alias /dev/pg /dev/sg alias /dev/pg* /dev/sg # Floppies alias /dev/floppy floppy alias /dev/fd* floppy # RAMDISCs alias /dev/rd rd alias /dev/ram* rd # Loop devices alias /dev/loop* loop # Meta devices alias /dev/md* gen-md # Parallel port printers alias /dev/printers* lp alias /dev/lp* /dev/printers # Soundcard alias /dev/sound sound-slot-0 alias /dev/audio /dev/sound alias /dev/mixer /dev/sound alias /dev/dsp /dev/sound alias /dev/dspW /dev/sound alias /dev/midi /dev/sound # Joysticks alias /dev/js* /dev/joysticks # Serial ports alias /dev/tts* serial alias /dev/ttyS* /dev/tts alias /dev/cua* /dev/tts # Input devices alias /dev/input/mouse* mousedev alias /dev/input input probeall /dev/input/mice mousedev usb-uhci hic alias /dev/usbmouse /dev/input/mice # Miscellaneous devices alias /dev/misc/atibm atixlmouse alias /dev/misc/inportbm msbusmouse alias /dev/misc/logibm busmouse alias /dev/misc/rtc rtc alias /dev/misc/nvram nvram alias /dev/misc/agpgart agpgart alias /dev/rtc /dev/misc/rtc alias /dev/nvram /dev/misc/nvram # PPP devices alias /dev/ppp* ppp_generic # Video capture devices alias /dev/video* /dev/v4l alias /dev/vbi* /dev/v4l # agpgart alias /dev/agpgart agpgart alias /dev/dri* agpgart # Irda devices alias /dev/ircomm ircomm-tty alias /dev/ircomm* /dev/ircomm # Raw I/O devices alias /dev/rawctl /dev/raw # Pull in the configuration file. Do this last because modprobe(8) processes in # per^H^H^Hreverse order and the sysadmin may want to over-ride what is in the # generic file #include /etc/modules.conf ### update-modules: end processing /etc/modutils/1devfsd ### update-modules: start processing /etc/modutils/actions # Special actions that are needed for some modules # The BTTV module does not load the tuner module automatically, # so do that in here post-install bttv insmod tuner post-remove bttv rmmod tuner ### update-modules: end processing /etc/modutils/actions ### update-modules: start processing /etc/modutils/aliases # Aliases to tell insmod/modprobe which modules to use # Uncomment the network protocols you don't want loaded: # alias net-pf-1 off # Unix # alias net-pf-2 off # IPv4 # alias net-pf-3 off # Amateur Radio AX.25 # alias net-pf-4 off # IPX # alias net-pf-5 off # DDP / appletalk # alias net-pf-6 off # Amateur Radio NET/ROM # alias net-pf-9 off # X.25 # alias net-pf-10 off # IPv6 # alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP # alias net-pf-19 off # Acorn Econet alias char-major-10-175 agpgart alias char-major-10-200 tun alias char-major-81 bttv alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate # Crypto modules (see http://www.kerneli.org/) alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5 # aw: sound module alias sound-slot-0 cs4232 ### update-modules: end processing /etc/modutils/aliases ### update-modules: start processing /etc/modutils/apm alias char-major-10-134 apm alias /dev/apm_bios /dev/misc/apm_bios alias /dev/misc/apm_bios apm ### update-modules: end processing /etc/modutils/apm ### update-modules: start processing /etc/modutils/irda alias tty-ldisc-11 irtty alias char-major-161 ircomm-tty alias char-major-60 ircomm_tty # for dongle alias irda-dongle-0 tekram alias irda-dongle-1 esi alias irda-dongle-2 actisys alias irda-dongle-3 actisys alias irda-dongle-4 girbil alias irda-dongle-5 litelink alias irda-dongle-6 airport alias irda-dongle-7 old_belkin # for FIR device #alias irda0 nsc-ircc dongle_id=0x09 ### update-modules: end processing /etc/modutils/irda ### update-modules: start processing /etc/modutils/mwavem alias char-major-10-219 mwave alias /dev/modems/mwave mwave alias /dev/misc/mwave mwave #options mwave mwave_3780i_io=0x130 mwave_3780i_irq=10 mwave_uart_io=0x2f8 mwave_uart_irq=3 options mwave mwave_3780i_irq=7 ### update-modules: end processing /etc/modutils/mwavem ### update-modules: start processing /etc/modutils/paths # This file contains a list of paths that modprobe should scan, # beside the once that are compiled into the modutils tools # themselves. ### update-modules: end processing /etc/modutils/paths ### update-modules: start processing /etc/modutils/ppp alias /dev/ppp ppp_generic alias char-major-108 ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate ### update-modules: end processing /etc/modutils/ppp ### update-modules: start processing /etc/modutils/setserial # # This is what I wanted to do, but logger is in /usr/bin, which isn't loaded # when the module is first loaded into the kernel at boot time! # #post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload" #pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload" # alias /dev/tts serial alias /dev/tts/0 serial alias /dev/tts/1 serial alias /dev/tts/2 serial alias /dev/tts/3 serial post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null ### update-modules: end processing /etc/modutils/setserial ### update-modules: start processing /etc/modutils/thinkpad path[thinkpad]=/lib/modules/`uname -r`/thinkpad options thinkpad enable_smapi=1 enable_superio=1 enable_rtcmosram=1 enable_thinkpadpm=1 alias char-major-10-170 thinkpad alias /dev/thinkpad thinkpad alias /dev/thinkpad/thinkpad thinkpad alias /dev/thinkpad/smapi smapi alias /dev/thinkpad/superio superio alias /dev/thinkpad/rtcmosram rtcmosram alias /dev/thinkpad/thinkpadpm thinkpadpm ### update-modules: end processing /etc/modutils/thinkpad ### update-modules: start processing /etc/modutils/arch/i386 alias parport_lowlevel parport_pc alias char-major-10-144 nvram alias binfmt-0064 binfmt_aout alias char-major-10-135 rtc ### update-modules: end processing /etc/modutils/arch/i386